Designed to enhance the sonic quality of in-ear personal monitors and provide level protection, the dbx IEM in-ear personal monitor processor features legendary dbx effects like 4-band stereo compression with gating and limiting, PeakStop limiting, and 5-band parametric EQ, plus stereo adjust, dbx proprietary Type IV conversion system, and custom reverb algorithms using industry-standard Lexicon technology. The intuitive front panel provides instant access to all effects within the IEM at the push of a button, and a large custom display clearly shows all operational information.

dbx IEM In-Ear Personal Monitor System Processor Specifications:

• Inputs
• Connectors: female XLR and 1/4'' TRS (pin 2 and tip hot)
• Type: electronically balanced/unbalanced, RF filtered
• Impedance: balanced >18 kOhms, unbalanced >9 kOhms
• Max input level: +24dBu balanced or unbalanced
• CMRR: >40dB, typically >55dB at 1kHz
• Input gain range: -∞ to +16dB
• MIDI: 5-Pin DIN MIDI input jack
  
  Outputs
• Connectors: male XLR and 1/4'' TRS (pin 2 and tip hot)
• Type: servo-balanced/unbalanced, RF filtered
• Impedance: balanced 120 ohms, unbalanced 60 ohms
• Maximum output level: >+21dBu balanced/unbalanced into 2kOhm or greater; >+20dBm balanced/unbalanced (into 600 ohms)
• Output gain range: -∞ to +16dB
• MIDI: 5-Pin DIN MIDI out/thru jack
• PC COMM: RS232
  
  A-D System Performance
• A-D conversion: 24-bit, dbx Type IV conversion system
  
  Converter Dynamic Range:
• 114dB typical, A-weighted, 22kHz bandwidth
• 112dB typical, unweighted, 22kHz bandwidth
  
  Type IV Dynamic Range:
• Up to 127dB with transient material, A-weighted, 22kHz bandwidth
• Up to 125dB with transient material, unweighted, 22kHz bandwidth
• Typically 119dB with program material, A-weighted, 22kHz bandwidth
• Typically 117dB with program material, unweighted, 22kHz bandwidth
  
  THD + Noise:
• 0.002% typical at +4dBu, 1 kHz, input gain at 0dB
  
  Frequency Response:
• 20Hz to 20kHz, +0/-0.5dB
  
  Interchannel Crosstalk:
• < -85dB at 1 kHz, input gain at 0dB
  
  D-A System Performance
• D-A conversion: 24-bit
• Dynamic range: 115dB typical, A-weighted, 22kHz bandwidth
• 112dB typical, unweighted, 22kHz bandwidth
• THD + Noise: 0.002% typical at +4 dBu, 1 kHz, output gain at 0 dB
• Frequency response: 20Hz to 20kHz, +0/-0.5dB
• Interchannel crosstalk: < -85dB at 1kHz, output gain at 0dB
  
  Power Supply
• Operating voltage: 100-240 VAC 50/60Hz
• Power consumption: 24W
  
  Physical
• Dimensions: 19''W x 1.75''H x 10''D
• Weight: 7.14 lbs. (3.24kg)

dbx IEM In-Ear Personal Monitor System Processor Features:

• Industry-standard Lexicon reverb algorithms
• 48-bit internal signal path for increased headroom and low level resolution
• Type IV A/D conversion system with TSE
• 4-band stereo compressor and limiter with classic dbx compression
• 5-band EQ - hi and lo shelves, 3-band fully parametric
• PeakStop limiting
• Stereo adjust to control your stereo image
• 4-band crossover with variable slopes

A must-have for performers and engineers who use in-ear personal monitors and require the highest possible fidelity and functionality. Order today!