The U873R UniPoint hypercardioid condenser microphone offers smooth, accurate audio reproduction for handheld and fixed-mount applications. The microphone is equipped with A-T's UniGuard technology for unsurpassed immunity from radio frequency interference. It also features an 80 Hz UniSteep filter that reduces pickup of unwanted low-frequency ambient noise. The microphone's special internal shock mounting eliminates virtually all handling and cable noise. Designed for distortion-free output even in intense sound fields, interchangeable elements (cardioid, hypercardioid and omnidirectional) permit selection of angle-of-acceptance from 100 degrees to 360 degrees. Requires phantom power.

Audio-Technica U873R Handheld Hypercardioid Condenser Microphone Specifications:

• ELEMENT: Fixed-charge back plate, permanently polarized condenser
• POLAR PATTERN: Hypercardioid
• FREQUENCY RESPONSE: 70-20,000 Hz
• LOW FREQUENCY ROLL-OFF: 80 Hz, 18 dB/octave
• OPEN CIRCUIT SENSITIVITY: —41 dB (8.9 mV) re 1V at 1 Pa
• IMPEDANCE: 200 ohms
• MAXIMUM INPUT SOUND LEVEL: 155 dB SPL, 1 kHz at 1% T.H.D.
• DYNAMIC RANGE (TYPICAL): 131 dB, 1 kHz at Max SPL
• SIGNAL-TO-NOISE RATIO: 70 dB, 1 kHz at 1 Pa
• PHANTOM POWER REQUIREMENTS: 11-52V DC, 3 mA typical
• SWITCHES: Flat, roll-off; 10 dB pad
• WEIGHT: 5.6 oz (160 g)
• DIMENSIONS: 6.17" (156.7 mm) long, 1.48" (37.7 mm) head diameter
• OUTPUT CONNECTOR: Integral 3-pin XLRM-type
• OPTIONAL INTERCHANGEABLE ELEMENTS: UE-C cardioid (120 degrees); UE-O omnidirectional (360 degrees)
• ACCESSORIES FURNISHED: AT8122 foam windscreen; AT8405a stand clamp for 5/8"-27 threaded stands; soft protective pouch
• AUDIO-TECHNICA CASE STYLE: S2

Audio-Technica U873R Handheld Hypercardioid Condenser Microphone Features:

• Designed for high-quality sound reinforcement, professional recording and broadcasting
• Smooth, accurate reproduction for handheld and fixed-mount applications
• Superior off-axis rejection for maximum gain before feedback
• Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• Integral 80 Hz high-pass filter switch and 10 dB pad switch
• Accepts interchangeable elements to permit angle of acceptance from 100 degrees to 360degrees
• Superior anti-shock engineering ensures low handling noise
• High sensitivity and high SPL capability
• Robust design for enduring dependability

Save BIG when you buy today!