The Audio-Technica ATW-2192 Wireless System includes:

ATW-R2100 receiver, ATW-T210 UniPak Transmitter, AT892cW Omnidirectional Condenser Headworn Microphone, element covers, windscreens, and clothing clip.

Audio-Technica's innovative 2000 Series wireless delivers professional performance, unheard of in its class. With this breakthrough series, Audio-Technica makes easy setup, automatic scanning and other advanced wireless features affordable as never before.


Automatic frequency scanning - standard on all 2000 Series wireless receivers - finds and sets the best available channel at the touch of a button. For those using multiple wireless systems simultaneously, the 2000 Series offers another ease-of-use standout: any of its 10 channels may be used together - eliminating confusing frequency groups and other frequency-coordination problems.

Audio-Technica ATW-2192 Wireless System Specifications:

• Overall System Specifications
• Operating Frequency: UHF band, 656.125 to 678.500 Mhz
• Number of Channels: 10 total
• Frequency Stability: +/-0.005%, phase lock loop frequency control
• Modulation Mode: FM
• Normal Deviation: +/-5kHz
• Operating Range: 300' typical
• Frequency Response: 100Hz to 15kHz
• ATW-R2100 Receiver Specifications
• Receiving System: Dual independent receivers, automatic-switching diversity
• Image Rejection: 55 dB nominal, 50 dB minimum
• Signal-to-Noise Ratio: >100dB at 40kHz deviation (A-weighted), maximum modulation 40kHz
• Total Harmonic Distortion: <1% (+/-10kHz deviation at 1kHz)
• Sensitivity: 20dBuV (S/N 60dB at 5kHz deviation, IEC-weighted)
• Intermediate Frequency: 65.75 MHz, 10.7 MHz
• Audio Output (AF Level set at "0"): Unbalanced: 25 mV (at 1kHz, +/-5kHz deviation, 100k ohm load); Balanced: 12.5 mV (at 1kHz, +/-5kHz deviation, 100k ohm load)
• Output Connectors: Unbalanced: 1/4" phone jack; Balanced: XLRM-type
• Power Supply: 120V AC 60Hz, or 12-18V DC, 350 mA, with external supply
• Dimensions (W x H x D): 8.27" x 1.73" x 6.39"
• Weight: 2.2 lbs
• Accessories Included: Two flexible UHF antennas, rack-mount adapters, ACadapter
• ATW-T210 UniPak Transmitter Specifications
• RF Power Output: 12mW
• Spurious Emissions: Under federal regulations
• Input Connections: High impedance, low impedance, bias
• Batteries (not included): Two 1.5V AA alkaline
• Current Consumption: 150 mA typical
• Battery Life: Approximately 9 hours (depending on battery type and use pattern)
• Dimensions (W x H x D): 2.60" x 3.63" x 0.89"
• Net Weight (without batteries): 2.82 oz

Audio-Technica ATW-2192 Wireless System Features:

• Clear sound quality and rock-solid dependable performance
• Automatic frequency scanning finds an open channel at the touch of a button
• All 10 user-switchable channels are compatible - for easy use with multiple systems; no confusing frequency groups
• True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
• Tone Lock tone squelch system fights interference
• Rugged metal half-rack receiver with soft-touch controls and LCD display featuring RF and AF metering
• Balanced XLR and unbalanced 1/4" output jacks enable use with a wide variety of audio gear
• Includes rack-mount kit and detachable UHF antennas
• Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver

Get your voice heard clearly with ease, don't wait, Click or all now!