The Markbass Little Mark II is a stunning bass amp head that combines great sound, compact size, and light weight. The Little Mark II is Markbass' biggest seller and it's the flagship amp of the Markbass line. Its small size makes the Little Mark II easy to transport, yet with a 4-band EQ, VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter), its tone is nothing short of professional. The I/O includes an input that can handle both passive and active basses and an extra XLR balanced input for double bass pickups. Its Neutrik Speakon Combo out jacks work with 1/4" or Speakon speaker cables. A tuner out jack sends unbalanced signals to a tuner, amp, or recording equipment. Send and return effect jacks maintain your main signal even if something dies in your effects chain.

Markbass Little Mark II 500W Bass Amp Head Specifications:

• Power
• Input impedance: 500Kohm, max. voltage: 15 Vpp
• Balanced Output (XLR): 22Kohm, max. voltage 25 Vpp
• Effect Return impedance: 22Kohm, max. voltage: 25 Vpp
• Output Power: 300W RMS at 8 ohm, 500W RMS at 4 ohm
• Power requirement: 100/120V; 230V; 240V; 50/60Hz
  
  Controls
• GAIN 80 dB to +23 dB range
• MASTER VOLUME
• GROUND LIFT: switch on rear panel
  
  Equalization
• LOW
• Center frequency: 40Hz; level ±16dB
• LOW MID
• Center frequency 360Hz, level ±16dB
• HIGH MID
• Center frequency 800Hz, level ±16dB
• HIGH
• 10kHz shelf; level ±16dB
• VPF (Variable Pre-shape Filter)
• center frequency 380Hz (cut)
• VLE (Vintage Loudspeaker Emulator)
• frequency range 250Hz 20kHz (cut)
  
  Outputs
• EFFECT SEND
• Unbalanced, max. voltage 20 Vpp (pre-EQ)
• TUNER OUT
• Unbalanced, max. voltage 25 Vpp
• LINE OUT
• Balanced XLR, max. voltage 10 Vpp
• SPEAKER OUT
• Speakon, 1/4"
  
  Other
• Dimensions: 10.87"W x 2.8"H x 10.1"D
• Weight: 6.39 lbs.

Markbass Little Mark II 500W Bass Amp Head Features:

• Solid state preamp analog bass head
• Provides 300W RMS at 8 ohms, 500W RMS at 4 ohms
• 1/4" input jack works with active or passive basses
• Balanced XLR on front for double bass pickups
• Gain and Master volume controls
• Clip warning light
• EQ includes controls for Low, Mid Low, MId High, and High
• VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters
• Neutrik Speakon Combo out jacks for use with 1/4" or Speakon speaker cables
• Balanced XLR out
• Ground lift switch to eliminate hum
• Tuner out sends unbalanced signal sent to a tuner, amp or recording equipment not needing a balanced signal
• Effect Send and Return maintain signal even when effects fail
• Dual-sided fiberglass PC boards with lined perforations for high-quality solder connections
• Surface-mount components are silicon-sealed to isolate vibrations
• Computer-grade pre-assembled ribbon connector cable harnesses and ribbons for noise-free operation
• Integrated threaded posts for easy assembly/disassembly and added durability
• Rigid 2mm thick aluminium chassis

500W of bass-kicking power in a small, portable bass head. Very cool. Order yours today!